Introduction of Zeolite rotor concentration equipment: Zeolite rotor concentration equipment, especially suitable for large air volume, low concentration of organic waste gas treatment occasions, at the same time will be adsorption concentration unit and thermal oxidation incineration (such as: regenerative incineration, thermal incineration, catalytic incineration, etc.) unit of organic waste gas treatment of an organic combination of methods. Suitable for. Petrochemicals, fine chemicals, spraying, packaging and printing, pharmaceuticals and pesticides manufacturing, semiconductor and electronic products manufacturing, wood-based panels and wooden furniture manufacturing, leather, enameled wire, shoes, coatings, inks, adhesives production, metal casting and so on. The types of VOCs produced in each industry are commonly composed of hydrocarbons, benzene, alcohols, ketones, phenols, aldehydes, esters, amines, nitrile (cyanide), and so on. Advantages of zeolite rotor concentration equipment: (1)High suction and desorption efficiency, so that the production of high air volume, low concentration of VOCs exhaust gas, converted to low air volume, high concentration of exhaust gas, reduce the cost of the back-end final treatment equipment;. (2) The zeolite rotor adsorption of VOCs produced by the pressure drop is very low, can greatly reduce power energy consumption; (3), the zeolite rotor adsorption of VOCs produced by the pressure drop is very low, can greatly reduce power energy consumption. (3) Concentration factor reaches 5-20 times, greatly reducing the specifications of the post-treatment equipment, lower operating costs. (4) The whole system adopts pre-assembled and modularized design, which has smaller space requirement and provides continuous and unmanned operation mode. (5) The exhaust gas after concentration of the rotor can meet the national emission standards. Technical advantages of zeolite rotor concentration equipment:Suitable for continuous operation, rotating adsorption wheel structure, stable speed, adsorption and desorption wind speed is consistent, at the same time continuous, there is no bias flow phenomenon, desorption concentration is stable, high purification efficiency. ①Good safety: the adsorption material is non-combustible, eliminating the hidden danger of fire; ② high efficiency: purification efficiency up to 95%, environmental protection standards; ③Stable operation: the adsorption and desorption are stable and continuous, and the desorption temperature reaches 200℃; ④Low maintenance cost: long life of adsorption material; no control valve; ⑤Low investment: more than 15 times concentrated, post-treatment equipment requirements are reduced; ⑥ a variety of processes can be combined, high utilization rate of waste heat: with RTO to achieve high heat recovery ≥ 95%; combined with CO recovery of waste heat.